MANIAC - shampoo for black or foiled surface 500ml for Car detailing

The shampoo for black or wrapped surfaces for car detailing, Black & Wrap Shampoo MANIAC, washes and protects against limescale. Its formula removes the micro-film of limescale that forms wash after wash. It is designed for deep and gentle washing and cleaning with a decontaminating effect on black cars or cars covered with adhesive film or PPF, even with a matte finish. Its high lubricity creates a slick surface that allows the mitt to glide without the risk of creating micro-scratches or swirls. With regular use, it removes the grey patina that dulls black and matte colours, restoring their original shine.

Use:
Before using Black & Wrap Shampoo, as always before hand washing with shampoo, perform a thorough pre-wash using a 'Foam Gun Prewash'. After the pre-wash, you can proceed with the hand wash of the vehicle.
It is recommended to use the two-bucket method (one with the shampoo and water solution and the other with just clean water) in combination with a microfibre mitt, such as the Double Face, or a sponge/pad, such as the Microfiber Pad. Using a grit guard in the bucket helps to remove dirt and deposits from the mitt or sponge, which will settle at the bottom of the bucket.
Preparing the shampoo and water solution: dilute 4 capfuls of the product into 8 litres of water (1:300) in a bucket.
Hand washing: Wash one panel at a time, always in the shade, with the vehicle wet and from top to bottom.
For each panel, rinse the sponge or mitt in the bucket of clean water. Coarse dirt particles can remain trapped in the sponge and could have an abrasive effect or cause scratches on the paintwork. Work on individual panels, making sure to clean all components including logos and details. Finish washing the entire vehicle; never let the shampoo dry on the bodywork.
On a particularly dirty or matte surface: Pour a few drops of the product directly onto the dampened mitt and spread it over the wet vehicle.
Rinsing: Rinse the vehicle with a high-pressure jet of water from top to bottom. Its formula, rich in mineral sequestrants, significantly prevents the formation of limescale deposits (water spots) during drying, leaving the surface clean and protected.
Drying: Apply Exterior Quick Detailer to the wet surface and use a Super Dryer microfibre cloth for quick and effective drying in complete safety. Use two Super Dryer cloths: one for the bodywork and the other for the windows, to keep the windows as dry as possible. You can also use the cloth to finish profiles or fine details. When drying the sides of the vehicle or lower parts, fold the cloth so that it does not touch the ground and pick up dirt that could cause scratches.
Recommendations:
To prevent the shampoo from drying and causing spots, wash the car in the shade and never in direct sunlight.
If the vehicle has been exposed to the sun or the bonnet is very hot, cool the surface with a stream of cold water.
Start from the top - it's the least dirty part, so you'll avoid soiling the mitt: washing will be quicker.
Try using two buckets - put the water and shampoo solution in the first one, and just water in the second to rinse the sponge or mitt frequently: this will prevent scratching the bodywork.
Wash in small sections - You won't miss any spots, the product will be able to work at its best without drying out: you'll avoid spots and streaks.
Perfect circles - to clean the rims, use a brush that can get into even the most hidden places.

Warning:
H318: Causes serious eye damage.
H317: May cause an allergic skin reaction.
H412: Harmful to aquatic life with long-lasting effects.
P102: Keep out of reach of children.
P273: Avoid release to the environment.
P280: Wear protective gloves and eye protection.
P302+P352: IF ON SKIN: Wash with plenty of water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313: If eye irritation persists, get medical advice/attention.
P501: Dispose of contents/container in accordance with local, regional, national, or international regulations.