GYS Charger/Stabilised Power Supply DIAG-BATIUM 100.12 PV, 12 V, 5-1200 Ah, 2.5m cable
GYS Charger/Stabilised Power Supply DIAG-BATIUM 100.12 PV, 12 V, 5-1200 Ah, 2.5m cable
Diag-Batium 100.12 FV is an essential everyday tool for modern car service centers and garages. This high-performance unit is designed for optimal maintenance and charging of 12V batteries, and thanks to its ability to deliver a continuous current of 90A (up to a maximum of 100A), it can easily handle the demanding requirements of vehicle diagnostics and reprogramming without any loss of performance. The Diag-Batium 100.12 FV is the ideal choice for intensive professional use where uncompromising charging quality and power stability arerequired during service operations.
Key features of the GYS DIAG-BATIUM 100.12 FV Charger/Stabilized Power Supply, 12V, 5-1200Ah, 2.5m cables
- Ideal for use in diagnostics
- Maximum current of 100A is maintained regardless of the electrical network
- Adjustable voltage from 12 to 14.8V (in 0.1V increments) for precise compliance with manufacturers' recommendations
Key modes of use
The device offers three main modes that cover all battery maintenance needs: Lead batteries (Pb): Charging of 12V lead batteries (gel, AGM) with a capacity of 5 to 1200Ah. Lithium batteries (LiFePO4): Specific charging for 12V lithium cells (LFP) in the range of 5 to 1200Ah.
Diagnostics and power supply: Supports the vehicle's on-board network with up to 100A during service diagnostics. Power supply mode allows the charger to be used as a stabilized power source.
Advanced Intelligent Curve Charging Technology
Automatic charging takes place in 7 steps for lead-acid batteries and 9 steps for lithium (LFP) batteries, which extends their service life and increases performance.
Rescuing dead batteries
SOS Function: Allows you to force charging of lead-acid batteries even at voltages below 1V.
UVP Wake Up: Special function for "waking up" deeply discharged lithium batteries.
Automatic desulfation: For restoring lead-acid batteries in poor condition.
Flexible voltage (FV): The charger is equipped with Flexible Voltage technology, which allows it to operate within a wide range of supply voltages from 95 to 265V.
Precision and Safety
Adjustable voltage: To comply precisely with the manufacturer's recommendations, the voltage can be set from 12 to 14.8V (in increments of 0.1V).
Maximum protection: Integrated systems protect the vehicle's on-board electronics against short circuits, polarity reversal, and overloads. The device features an anti-sparking system and an internal temperature sensor to prevent overheating.
Easy to use: Intuitive HMI interface and automatic charging start immediately after connecting thebattery.
Maximum charging current:
100A
Work Cycle (při 230V):
90A @ 100%
Length of Cables:
2,5m (cross-section 16mm2)
Dimensions:
320 × 235 × 136mm
Weight:
5,8kg
Cover:
IP20
Specifications
Technical specification
Features and equipment
Dimensions and weight
Packaging
| Code: | MOTO57124 |
| Warranty: | 36 months |
| Manufacturer information |
ACI Auto Components International s.r.o.,Podnikatelská 549, 190 11 Praha 9 - Běchovice, [email protected], www.aci.cz 
|