APC Power Saving Back-UPS Pro 1200 eurosocket

The APC Power Saving Back UPS Pro 1200 PSU provides backup power for devices with a medium-level power draw. It also protects connected equipment from damaging effects of power surges and spikes. The PSU includes automatic voltage regulation, which continuously adjusts high and low voltages to safe levels, so that the connected devices work with constant voltage regardless of whether the network experinces overvoltage or undervoltage. The APC Back UPS Pro 1200 also contains various "green features", such as turning off the PSU when the connected device is idle, or high power efficiency of the UPS as a whole.
The PSU gives you six Euro sockets in total, three of which are protected by surge protection and powered by the battery (one with power-saving function), and the other three are only equipped surge protection (all three feature power-saving function). The sockets that aren't battery-powered can be useful for devices that do not require uninterrupted power supply. The UPS also includes a clear LCD panel and ports for administration.
Specifications:
Output:
Power output: 720 W/1200 VA
Rated output voltage: 230V
Efficiency at full load: 89%
Efficiency at half load: 85%
Waveform type: Stepped approximation to a sinewave
Output connections:
Six French/Belgian outputs in total
3x French/Belgian (battery backup)
3x French/Belgian (surge protection)
Input:
Rated input voltage: 230V
Input frequency: 50/60Hz +/- 3Hz (automatic detection)
Input connections: French/Belgian
Cord length: 1.83m
Batteries and runtime:
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte (leakproof)
Typical recharge time: 8hrs
Spare batteries: APCRBC124
Number of battery modules: 1
Runtime according to the load:
50W: 2hrs 1min/100W 1hr 12min/200W: 38min/300W: 25min/400W: 17min/500W: 13min/600W: 10min/700W: 8min
Communications and management:
Control panel: Multi-function LCD status and control console
Audible alarm: Alarm when on battery / distinctive low battery alarm / overload continuous tone alarm
Surge protection and filtering:
Energy rating: 445 J
Filtration: multi-pole noise filtering/IEEE surge 5%/zero response time
Data line protection: analog phone line for telephone, fax, modem and DSL (RJ-11) Network - 10/100/1000 Base-T Ethernet (RJ-45 connector)
Administration interface:
USB port
Serial interface RS-232
Environment:
Audible noise at 1 metre from surface of unit: 45dBA
Operating humidity: 0-95%
Operating environment: 0-40°C
Design:
Colour: black
Dimensions: 301 x 112 x 380mm
Weight: 11.6kg