Is drawing on paper something you find easy? Do you want a new challenge? Or do you want to develop the creativity of your children? Now you can draw in the air! The 3D Simo MultiPro 4-in-1 is based on the principle of the extrusion of plastic material over a hot end. The pen can handle various materials such as ABS, PLA, PETG, HIPS, LAYbrick, Luminous, Wood, Flexi, etc. - at different temperatures, to achieve the best results. The high choice of temperatures and materials provides unprecedented possibilities for your creativity. Create models that shine in the dark or models that change colour when the temperature changes. Compared to the smaller version, the 3D Simo Mini, this 3D Simo MultiPro 4-in-1 is made of better materials that can withstand higher temperatures. The pen also features a graphical OLED display for easier control and adjustment and many other features.
The 3D Simo MultiPro 4-in-1 is the ideal multifunctional tool for every craftsman, hobbyist and techie. Want to do more than draw in 3D? Simply change the attachments, which are especially easy to change thanks to the spring mechanism, to solder, burn or cut with an angle plate. The pen automatically recognises which attachment you are using and guides you through a tutorial on the OLED screen when using each attachment for the first time. You can adjust the speed and temperature using the controller and display on the pen. After being plugged in, the MultiPro will welcome you and switch to the basic menu. You can easily adjust the brightness of the display backlight or the language used. The 3D Simo MultiPro 4-in-1 also allows the use of various types of materials such as ABS (material used in conventional kits), PLA (organic material made mainly from corn starch), water-soluble PVA and, last but not least, wood, metal, or nylon. The material is used in the form of a 1.75mm wide fibre. With the increasing trend of 3D printing, the range of materials will continue to grow, and the 3D Simo MultiPro 4-in-1 is fully prepared for this because of the adjustability of all the parameters.
You do not have to worry about your health or the health of your kids if you use this 3D pen. No-one will suffer health damage inadvertently. None of the original materials, such as ABS, PLA, PVA, nylon and others, are harmful or toxic. These are materials used in the production of common toys for children, building kits, food or textile products. However, the material is hot during use for a very short time, and therefore caution should be exercised and it should not be touched until it cools. For this reason, it is not recommended to apply these materials directly to the bare body. You can however apply them to fabric or paper.
Code: | DF201a |
Product Number: | G3D1005 |
Links: | Producer's Website: |